Monday – Saturday · 08:30 – 19:00 +90 551 113 11 90 info@osakcelikhalat.com Shipping to all 81 provinces
Wire Rope Clip — Rigging Hardware | OSAK
Rigging Hardware

Wire Rope Clip

U-bolt clip for forming eyes at wire rope ends. DIN 741 galvanized and forged heavy duty, 3–40 mm.

Material
Forged / malleable steel, galvanized
Size
3 – 40 mm
Standard
DIN 741 / DIN 1142
Sold as
Per piece / box (wholesale)
Variants
DIN 741 galvanized clipForged heavy-duty clipStainless clipGalvanized bow shackle
  • Wholesale & retail
  • Cut to length
  • Same-day shipping by 15:00

Product Description

A wire rope clip is the most practical way to form a fixed eye by folding the rope end back on itself. It consists of a U-bolt, a saddle (bridge) and two nuts. The picture shows, from left to right, a galvanized bow shackle, a DIN 741 galvanized clip and a yellow-passivated forged heavy-duty clip.

Correct installation rule: the saddle always goes on the load-bearing (live) end and the U-bolt on the free (dead) end. Depending on the rope diameter, at least three clips should be used, spaced about six rope diameters apart, and the nuts retightened after the first load. For lifting applications, use certified DIN 1142 clips.

FAQ

How many clips go on one rope end?

It depends on the rope diameter; at least 3 on small diameters and 4–6 on large diameters. The saddle must always be on the load-bearing end.

Let’s choose the right rope for your project.

Fill in the quote form or message us on WhatsApp; same-day shipping for stock items ordered by 15:00.

WhatsAppCallE-mail